Computer Installation and Assembling

Assembling the entire system might be a little tricky if you have never done it before. Some things you will want near you while doing this, is a cold drink, plenty of light, computer screws, all the manuals that came with the hardware you purchased, a screwdriver and of course, your sanity.
Make sure you DE-static your self (by Touching the computer power supply or wearing a very expensive anti static bracelet),


Configuring the Mother Board Jumpers

Configuring the Jumpers is the first thing to be done, consulting the motherboard manual on his to set it correctly is highly recommend. The following are what what is needed to be configured .

1. Power supply type: In the event that you have an AT/ATX motherboard you will need to set this one correctly.
2. CPU external bus frequency: This is where you specify what bus frequency
3. Inserting The CPU.